Components

Components

In addition to selling complete kits, Nitrous Supply offers a wide range of individual components. A number of other manufacturers who market complete systems get key components from Nitrous Supply. In reciprocation, NS is a distributor for components from NOS, Nitrous Express (NX), ZEX, Nitrous Outlet and others. Call the NS tech team at 714-373-1986 with any questions.

26020
26000
26048
SOLENOIDS

One of the most important components in a nitrous system, solenoids are
the “gatekeeper” for nitrous oxide and fuel supplies. Not only is the size of the
aperture important, but the speed at which it activates a key factor in efficiency.

NITROUS SOLENOIDS

#26020 – Standard nitrous solenoid (.078” orifice) with 1/8” NPT in-let/outlet.
Can support to 175 horsepower. $124.95

#26000 – Large nitrous solenoid (.093” orifice) with 1/4” NPT inlet/ 1/8” NPT
outlet. Can support to 250 horsepower $149.95

#26048 – Extra large bottom dump nitrous solenoid (.116” orifice) with 1/4”
NPT inlet/ 1/8” outlet. Can support to 400 horsepower $149.95

#26070 – XXL bottom-dump “Mutha Fogger” nitrous solenoid
(.125” orifice) with 1/4” NPT inlet/ 1/8” outlet. 15 amp draw. Can support to
500+ horsepower $149.95

#26010 – XXXL bottom dump “Trash Can” nitrous solenoid (.175” orifice) with
1/4” NPT inlet/ 1/8” outlet. 15 amp draw. Can support to 600 horsepower.
$169.95

#26005 – “Dragon” nitrous solenoid (.250” orifice) with 1⁄4” NPT inlet, 1/4”
outlet, bottom dump. Low amp draw. Can support 1,000 horsepower.
Does NOT work with a controller. $335.95

 

 

26070
26005
26010

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

26080
FUEL SOLENOIDS

#26080 – Standard fuel solenoid (.125” orifice) with 1/8” NPT in-let/outlet. Can
support to 200 horsepower. $81.95

#26050 – Extra large fuel solenoid (.156” orifice) with 1/8” NPT inlet/ outlet.
Can support to 500 horsepower. $89.95

#26060 – XXXL alcohol/nitromethane solenoid with Teflon seals throughout
(.215” orifice). $179.95

26050
26060

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

#134500D - Solenoid Mounting Plate
#134500 - Solenoid Mounting Plate
SOLENOID MOUNTING PLATES

Simply install the mounting plate below the carb plate
and you can install nitrous and fuel solenoids where
needed. All plates are CNC machined aluminum and
available for single fuel/nitrous solenoids or dual
fuel/nitrous solenoid installations. Available for
4150 and 4500 series carburetors.

 

#34150 – Solenoid mounting plate (single) for
4150-series carburetor $79.95
#34500 – Solenoid mounting plate (single) for
4500-series carburetor $79.95
#341500D– Solenoid mounting plate (dual) for
4150-series carburetor $89.95
#345000D – Solenoid mounting plate (dual) for
4500-series carburetor $89.95

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

Purge Kit Big
PURGE KIT

An important element of any competition system (and a crowd pleaser
at the races) purging the line of any trapped air before a run assures getting
a full charge of nitrous at the launch. Includes solenoid, tubing, activation
switch and wire.

#06020 – Purge kit for AN-4 line $118.95
#06025 – Purge kit for AN-6 line $122.95
#06030 – Purge kit for AN-8 line $127.95
#06023 – Dual inlet/single solenoid outlet purge kit for typical Fogger setup
with blue AN-4 fittings. $157.95
#06023-BK – Dual inlet/single solenoid outlet purge kit for Mutha Fogger
setup with black AN-6 fittings. $157.95

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

22620 Dominator Plate
Plate 22520
Plate 22600
CARBURETOR PLATES

With designs that have been refined
over the years, Nitrous Supply has carb plates
that are effective for various horsepower
applications. The ultimate plate-style system,
the awesome NS Criss Cross Outlaw features a
special plate with dual spray bars that intersect
at 90° to deliver a massive, atomized nitrous/
fuel mixture. This has proven to be ideal for use
with complex intake manifold configurations.
Twin-bar plates are available with standard
(Super Shot) and fine (Super Shot II) spray patterns that support increased
power levels.

#22500 – 1/2” thick twin-bar extreme flow Super Shot II (fine spray) plate for
4150 series carb (upgrade for NOS 250 HP Cheater system*) $224.95
#22520 – 1/2” thick Super Shot (standard spray) twin-bar plate for 4150 series
carb (fits NOS 175 HP Powershot system)* $199.95
#22600 – 1/2” thick large twin-bar extreme flow Super Shot II (fine spray) plate
for 4500 series carb (upgrade for NOS 250 HP Cheater system) $224.95
#22620 – 1/2” thick Super Shot (standard spray) twin-bar plate for 4500 series
carb (fits NOS 175 HP Powershot system) $199.95
#22565-S – 1” thick Criss-Cross plate (dual nitrous and fuel inlets with 2
nitrous and 2 fuel bars each) for 4150 series carb $349.95
#22665-S – 1” thick Criss-Cross plate (dual nitrous and fuel inlets with 2
nitrous and 2 fuel bars each) for 4500 series carb $349.95
• Also accommodates Edelbrock and Carter carburetors

Plate 22620
Plate 22565-S
22665-S-Criss Cross Plate

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

Fan Nozzles
Conical Discharge Nozzles
NOZZLES
FAN & CONICAL SPRAY NOZZLES

Nitrous Supply has developed a series of nozzles designed to individually
deliver nitrous oxide or fuel (not combined, like “fogger” type). They are ideal
for under-the-manifold and other “hidden” installations.

#23500-BL – Blue anodized aluminum fan spray nozzle – 45° discharge
(jet required) $18.95
#23500-RD – Red anodized aluminum fan spray nozzle – 45° discharge
(jet required) $18.95
#23500-BK – Black anodized aluminum fan jet spray nozzle – 45° dis charge
(jet required) $18.95
#23501 – Brass fan jet spray nozzle – 45° discharge – $20.95
#23505 – Stainless steel fan jet spray nozzle – 45° discharge – $21.95
#23502 – Blue anodized aluminum fan spray nozzle – straight discharge
$21.95
#23525 – Conical discharge 1/16 NPT nozzle $21.95
#23525-RD – Red anodized aluminum conical discharge nozzle $21.95
#23525-BK – Black anodized aluminum conical discharge nozzle $21.95
#23525-BL – Blue anodized aluminum conical discharge nozzle $21.95
#23525-SS – Stainless steel conical discharge nozzle $24.95
#23725 – Nozzle mounting kit for single or Fogger nozzles (for rubber or thinwall
air inlets) 1/16” NPT. $16.95

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

Fogger Nozzles Tips
23700 23700 23715
23712 23716 23800
FOGGER TYPE NOZZLES

With over 40 years experience with nitrous oxide, Mike Thermos and the
crew at Nitrous Supply know what it takes to properly disperse a mixture
of nitrous oxide and fuel for any given application. NS has many designs to
choose from.

 

#23716 – “Fine Plume” stainless steel nozzle with 1-inch reach and 1/16 NPT
fittings. Effective in many applications, it mixes the nitrous and fuel, then
delivers it in a 90° fine plume. $53.95

#23715 – Black oxide finished brass “Fine Plume” nozzle with 1/16 NPT fittings.
$43.95

#23700 – “Straight Shooter” stainless steel nozzle with 1/16 NPT fittings.
Designed to inject high volumes of nitrous oxide and fuel in a straight
pattern. $61.95

#23700SN – Short “Straight Shooter” nozzle. $61.95

#23712 – “Fang II” nozzle. Features two internal fuel channels and specially
shaped apertures to surround the nitrous when dispersed. CNC machined
from stainless steel billet with 1/16 NPT outlet fittings. Super high flow 90°
design. $69.95

#23800 – “Straight Shooter” short stainless steel extreme high flow nozzle
that employ a 1/8 NPT outlet (instead of 1/16) for increased performance.
Uses standard flare jets. $69.95

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

Nozzle bung kit 23725
NOZZLE BUNG

Designed to facilitate the installation of a Fogger or Fan nozzle in plastic,
composite, aluminum or rubber intake manifold or tract by drilling a 3/8”
hole, inserting the threaded brass sleeve on the inside and tightening the
bung over it using an O-ring or silicone for sealing.

#23725 – Threaded nozzle bung kit (one) $16.95

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

Weld bung
WELD BUNGS
Designed to facilitate installing nozzles in manifolds,
they are tapped 1/16 NPT, and can be welded into
 position. Available in packs of four or eight.

#23734 – Aluminum bungs (pack of 4) $27.80
#23738 – Aluminum bungs (pack of 8) $55.60

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

Stainless Jets
JETS

Unlike other jets on the market, these are precision-machined employing
laser technology to assure accurate sizing. They are available in both brass
and stainless steel for 3/16” applications. The brass jets come with a .014” pilot
hole and are designed for DIY drilling. Stainless steel jets are available in .001”
increments from .016” to .125”. When ordering, add three digits to the part
numbers below to indicate size (i.e. a .032” jet will have a “032” suffix).

#23750 – Stainless steel flare jet for 3/16” tubing $4.95 each

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

Jet Box KO 800 (6-pack)
NS Jet Box 800 (8-pack)
JET PACKS

The most convenient and economical way (unit prices as low as $3.50
each) to tune your Fogger-style nitrous system to perfection is by getting
an assortment of jets that are tailored to your needs. Nitrous Supply has
both “6-pack” and an “8-pack” with eight groups of eight jet sizes to facilitate
optimizing your nitrous and fuel mixtures. Comes with handy plastic
carrying case. Available only through phone orders given all the possible
combinations.

 

Jet 6-pack with 48 jets (specify six sizes wanted – unit price $4.25) $204.00
Jet 8-pack with 64 jets (specify eight sizes wanted – unit price $3.50) $224.00

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

Nitrous Electrical Components
CONTROLLERS & ELECTRICAL COMPONENTS

Nitrous Supply offers a wide array of electrical components that range
from a simple switch to elaborate controllers that activate the nitrous and fuel
charges through computer interfaces for single and multi-stage systems.

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

25835
25845
DIGITAL TIMER

We offer both the original “Digi-Set” timer that is designed to activate
various stages through establishing the time (in 1/10-second increments) that
can range from 1/10th of a second all the way to one minute and 45 seconds
through setting DIP switches and the “Nitrous Power” 2-dial progressive
controller.

#25835 – Digi-Set timer $84.95
#25845 – Nitrous Power controller $259.95

 

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

25602
256030
25606
ANCILLARY COMPONENTS

Everything you need to wire-up a nitrous system is available
from Nitrous Supply. These are quality, race-proven components
that have demonstrated their reliability over the years.

#25602 – Toggle switch (lighted) $5.95
#25603 – 2-way toggle switch (momentary) $8.95
#25606 – Blue toggle switch cover $4.95
#25610 – Push-button switch (momentary) $6.95
#25618 – 30-Amp relay assembly $18.95
#25640 – Micro-switch and bracket assembly $16.95
#25651 – Micro-switch (waterproof) $6.95
#25720 – Fuel pressure safety switch (5 psi) $____

 

25610
25720
25618
25640
25751

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

25685
ADJUSTABLE PRESSURE SWITCH

Can be employed to activate solenoids when a preset fuel or manifold
pressure is attained. Please call for details on getting the switch set to your
requirements.

#25685 – Adjustable pressure switch $59.95

 

 

 

 

 

 

 

Various micro-switch brackets are available.
Please call for details and pricing.

 

 

 

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

NS Refill Pump Kit
SPORTSMAN REFILL PUMP

Ideal for high volume nitrous users who wish to keep their bottles
topped off for peak efficiency or small businesses that sell refills, Nitrous
Supply has developed this “Sportsman” system. It’s designed to quickly
transfer the N2O from 48-64 lb. capacity “mother bottles” to smaller
vehicle-mounted bottles. Operates at 100 psi air pressure. The station kit
includes everything required to start refilling bottles, while the pump is also
available separately.

#24256-S – Sportsman refill pump (only) $795.00
#24256 – Sportsman refill station $1095.00

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

NS Scale
PORTABLE SCALE

Perfect for helping you get the correct amount of nitrous oxide in your
bottle, this portable digital scale from Nitrous Supply is a worthwhile adjunct to
any refill station. It can also be used to help calculate bottle flow rate.

#25250 – Portable scale $230.00

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.