Bottles
BOTTLES
Nitrous Supply has a huge inventory of aluminum bottles in a variety of
popular sizes and colors. Available sizes range from tiny 10-ounce capacity
bottles to models with big 20-lb. loads. All come with a competition-quality
valves (flow rates vary). See chart for availabilities. Stocked colors are Electric
Blue and gloss black. Other custom colors available upon request.
CARBON FIBER BOTTLES
For serious racing applications Nitrous Supply offers special
lightweight carbon fiber bottles. They have a 12-pound capacity
and come equipped with our most efficient, highest flowing bottle
valve —the Outlaw Power Valve. It features a lever release (instead
of a screw-out knob) to facilitate quick operation and use of an
externally mounted shut-off cable. Call for pricing on carbon fiber bottles with
lesser valve options.
#24812 – 12# carbon fiber bottle with Outlaw power valve $799.00
#24811 – 12# carbon fiber bottle with Super Hi-Flow bottle valve $599.00
BOTTLE BRACKETS
Nitrous Supply offers you three different methods of mounting
bottles; aluminum, steel or Nylon brackets. The CNC-machined billet
aluminum brackets come in single and double-bottle designs and sold
in pairs (bottles parallel to mounting surface), while the rubber-coated
steel and ultra-durable Nylon brackets come in matched pairs that
position the bottle at an angle.
#24130 – Single-bottle billet aluminum bracket for 7” diameter (10 &
15 lb.) bottles (pair). $249.95
#24132 – Double-bottle billet aluminum bottle bracket for 7” diameter
(10 & 15 lb.) bottles (pair). $449.95
#24125 – #24125 – Black vinyl-dipped steel brackets for 7” diameter
(10# and 15#) bottles (pair). These are standard on Super Shot II kits
$59.95
#24126 – Nylon brackets for 7” diameter (10# and 15#) bottles (pair).
These are standard on Super Shot kits. $29.95
Note: Steel or aluminum brackets are required for some forms of
competition.
BOTTLE WARMERS
For optimum performance it’s recommended to keep bottles warm. Nitrous
Supply offers dual voltage “blankets” that operate with either 110v or 12v (not
recommended for prolonged use as it will drain batteries). The warmers can
be controlled by a pressure sensor that turns the heater on if pressure drops
below a certain level, and shuts off when the pres-sure is achieved.
#24163 – Bottle warmer for 5-lb. bottle $179.95
#24164 – Bottle warmer for 10-lb. & 15-lb. bottles $179.95
#AN-15524-A – Bottle warmer for 56, 64, and 75-lb. “Mother bottles” $185.00
IMPORTANT TECH NOTE
Never use any open-flame device (torch, etc.) to warm the bottle. Always us a device that has been designed to distribute the heat evenly. There are documented incidents of torch-heated bottle exploding!
BOTTLE VALVES
There’s more to bottle valves than simply opening and closing the flow of
nitrous oxide. Nitrous supply offers no less than four valves for automotive use
that have a standard 660 connection and are compatible with both aluminum
and carbon fiber bottles with 5, 10, 15 and 20 lb. capacities. Two motorcycle
valves (5/8” and 3/4” thread) also available.
#26139 – Outlaw Power Valve developed by Nitrous Supply and CNC
machined from a high-strength 7075 aluminum alloy.. It has a large .500”
orifice for improved flow, with an AN-8 flare fitting, plus a big 5/8” siphon
tube. It has a 1⁄4-turn activating handle that can easily be attached to a pull
cable that can be operated from outside the vehicle to shut off the supply of
nitrous in case of a fire. Another safety feature is a pressure relief with an AN-8
flare fitting that lets you run a line outside the driver’s compartment. Also
comes with two gauge ports. Indicate bottle size when ordering so siphon
tube can be made to correct length. $269.95
#26140 – Super Hi-Flow valve with improved flow path, 1/8 NPT gauge port,
plus AN-8 “racer safety” port to facilitate routing pressure dis-charge outside
the vehicle, as well as a1/4” NPT side port for use with a NANO-type system.
$99.95
#26145 – Mini-valve with 3⁄4” thread for use on motorcycle nitrous system or
CO2/compressed air bottles. Has AN-4 fittings and 1/8 NPT gauge port. $94.95
#26146 – Mini-valve with 5/8” thread for use on motorcycle nitrous system or
CO2/compressed air bottles. Has AN-4 fittings and 1/8 NPT gauge port. $94.95
# 26143 – Chrome-plated Hi-Flow valve with gauge port. Supports up to 650
horsepower. Also has 1/8 NPT port. $89.95
#26145 – Standard brass Hi-Flow valve. $79.95
#26090 – “Racer Safety” dump tube with AN-8 fitting and 90° bend.
Fits #26143 and #26145. $22.95
#26180 – “Racer Safety” dump tube with AN-8 fitting and 180° bend.
Fits #26140 and #26151. $24.95
BOTTLE ADAPTERS
Available for AN-4, AN-6 and AN-8 applications. Fits standard “660”
threaded nitrous bottle. Available in aluminum or steel. Includes a Teflon
washer to assure a tight seal.
#26220 – Aluminum bottle adapter for AN-4 $15.95
#26225 – Aluminum bottle adapter for AN-6 $17.95
#26230 – Aluminum bottle adapter for AN-8 $19.95
The prices shown here may be superseded at any time due to supply, manufacturing and transportation issues. Prices shown are cash. A 3% fee -plus applicable taxes- will be added to credit card purchases. Please call to verify current pricing.