Complete Kits
#6101
#6103
SUPER SHOT series

Big power on a budget! Nitrous Supply has developed an adjustable
plate-style kit that can generate from 125 to 175 extra horsepower, yet is easy
on your wallet. Everything you need to install a nitrous system —activate it
and hang on! Super Shot kits include a 10 lb. aluminum bottle in your choice
of candy blue or gloss black, bottle valve, carb plate, gasket, solenoids, 14’
length of braided steel hose, lines, filter, jets for three power levels, nylon bottle
brackets, switches and all basic hardware.

 

#6101 – Super Shot kit for 4150 series (std. Holley) carburetor $399.00
#6103 – Super Shot kit for EFI system (150 HP maximum) $379.00

 

Easy-to-install “wet” system introduces nitrous oxide and fuel into
the plenum, near the throttle body, at wide open throttle. Includes 10 lb.
aluminum bottle in your choice of Candy Blue or gloss black, nozzle mount,
valve, nozzle, solenoids, 14’ length of braided steel hose, lines, filter, jets,
brackets, switches and all required hardware.

 

Note: Due to differences in OEM fuel delivery systems it may be necessary to
purchase additional components. Kit includes a length of AN-4 hose that will
work on most OEM test ports (Schrader valve) for the fuel source

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

#3001
#3102
SUPER SHOT II series

Engineered to provide more power than the Super Shot, (up to 275 HP
in most V8 engines) the Super Shot II from Nitrous Supply introduces more
nitrous oxide and fuel into the engine at full throttle. It has larger solenoids,
a higher flow bottle valve, an enhanced distribution plate and requires that
a high performance fuel pump and fuel pressure regulator are employed (if
over 150 HP jetting used).

Kits also include a 10 lb. capacity aluminum bottle (choice of candy blue
or gloss black) 14’ length of braided steel hose, lines, filter, jets (four power
settings), steel bottle brackets, switches and all required hardware.

#3001 – Super Shot II kit for 4150series (std. Holley) carburetor $649.00
#3002 – Super Shot II kit for 4500 series (Dominator) carburetor $649.00
#3010 – Super Shot II kit for dual 4150 series carburetors $785.00
#3011 – Super Shot II kit for dual 4500 Dominator carburetors $785.00

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

#3252B
#3251BD
CRISS-CROSS OUTLAW SERIES

The ultimate plate-style system, the awesome NS Criss Cross Outlaw
features a special plate with dual spray bars that intersect at 90° to deliver
a massive, atomized nitrous/fuel mixture. This has proven to be ideal for
use with complex intake manifold configurations. Due to the extra nitrous/
fuel lines it can only fit single 4-barrel applications. Naturally, a competition
caliber engine assembly, ignition and fuel system are required. It is available
for both single and dual stage applications. The dual-stage system, allows
the car to launch at one power set-ting and have the second stage come on
soon afterwards —great for coping with less-than-ideal traction. The upgrade
includes two more solenoids, plus hoses and fittings. These “firewall forward”
kits feature NS “Killer” solenoids (.125” orifice), as well as 14’ length of braided
steel hose, lines, filter, jets (four power settings), steel bottle brackets, switches
and all required hardware. Not shown is a flat carb plate on which you can
mount the solenoids.

Also available are complete packages that include a big 15 lb. bottle,
NS Super Hi-Flow valve (with safety) steel bottle brackets, switches and all
required hardware.

#3251 – Single stage firewall-forward Criss-Cross kit for 4150 series (std.
Holley) carburetor. $995.00
#3251B – Single stage Criss-Cross kit for 4150 series carb with 15# bottle, steel
brackets and 14’ of braided line. $1395.00
#3251D – Dual stage firewall-forward Criss-Cross kit for 4150 series (std.
Holley) carburetor $1295.00
#3251BD – Dual stage Criss-Cross kit for 4150 series (standard) with 15#
bottle, steel brackets and 14’ of braided line. $1695.00
#3252 – Single stage firewall-forward Criss-Cross kit for 4500 Holley
Dominator carburetor. $995.00
#3252B – Single stage Criss-Cross kit for 4500 series carb with 15# bottle, steel
brackets and 14’ of braided line. $1395.00
#3252D – Dual stage firewall-forward Criss-Cross kit for 4500 series
(Dominator) carburetor $1295.00
#3252BD – Dual stage Criss-Cross kit for 4500 Holley Dominator with 15#
bottle, steel brackets and 14’ of braided line. $1695.00

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

#3462B
STANDARD FOGGER SYSTEM

Designed to infuse serious power into an engine and give you the ability
to tune each individual cylinder to maximize performance. The standard NS
Fogger system plumbs into your manifold and uses hard lines and special
“slide” fittings that enable do-it-yourselfers to get professional results. Up
to 500+ extra horses are available through this system, so the engine needs
to have forged pistons, a competition caliber bottom end, upgraded head/
main studs and racing ignition and fuel system. The NS “firewall forward” kit
includes eight brass 90-degree “soft plume” fogger nozzles, four solenoids,
distribution blocks, fittings, three sets of jets (for three HP levels) plus stainless
steel hard lines with one end flared and special fittings to make plumbing
easy. Installation requires drilling and tapping the intake manifold with 1/16
NPT ports. Special bung kits are available.

Additionally, complete packages are available that includes a 10 lb.
nitrous bottle (choice of candy blue or gloss black), Super Flow valve with
gauge port, 14’ length of braided line, steel bottle brackets.

#3462 – Standard firewall-forward 8-cylinder Fogger system (150-500+
horsepower) $995.00
#3462B – Complete 8-cylinder Fogger system (150-500+ horsepower) with
bottle, valve and 14’ braided line. $1295.00
#5433 – Standard firewall-forward 4-cylinder Fogger system (50-225+
horsepower) $695.00
#5434 – Complete 4-cylinder Fogger system (50-225+ horsepower) with
bottle, valve and 14’ braided line. $995.00
Options
• System activation (switch, controller, etc.)
• Substitute 15 lb. bottle
• Flared tubing with B-nuts installed
• Show chrome, polished tubes, chrome solenoid covers
• All black fittings
• Nitrous purge kit
Note: Nitrous Supply can plumb your intake manifold. Call for details.

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

#6452B
“MUTHA FOGGER” SYSTEM

The ultimate in the Outlaw Series, this exceptionally high-flowing system
is used by many record-setters in Pro Mod, No-Prep and other quick nitrous
classes and can provide an extra 800 horsepower. Important attributes
include a 15 lb. bottle (choice of candy blue or gloss black), Super Hi-Flow
valve, humongous .125” orifice solenoids, superior atomization straight
hi-flow stainless steel nozzles, flared stainless steel tubing, black AN fittings,
stainless steel jets, and special equal-flow distribution blocks. Lines are AN-6
throughout.

Also available as a “firewall forward” kit that does not include the bottle,
brackets and 14’ feed line.

Because there are many different types of system activation, NS technicians
will configure the balance of the kit to your requirements. This includes the type
of nozzle (“straight shooter” or 90-degree). No electrical switches are included.
System activation needs to be added.

#6452 – Firewall-forward “Mutha Fogger” system. $1295.00
#6452B – Complete “Mutha Fogger” system with 15# bottle, steel brackets
and 14’ braided feed line. $1795.00

Options:
• System activation (switch, controller, etc.)
• Substitute Show chrome, polished tubes,
solenoid covers
• Fang II or “straight shooter” nozzles
• Purge kit
Dual Stage setup available. Please call for details.

Contact Sales by Email

Contact Sales

Contact Information
*
*
*



Orders with part numbers

Orders requiring tech assistance

 
*
CAPTCHA image

This helps us prevent spam, thank you.

The prices shown here may be superseded at any time due to supply, manufacturing and transportation issues. Prices shown are cash. A 3% fee -plus applicable taxes- will be added to credit card purchases. Please call to verify current pricing.